High Voltage Conductor Aluminium Alloy AAAC Mulberry Conductor For
|Model Number:||AAAC Mulberry|
|Insulation Material:||AAAC Mulberry Conductor|
|Application:||Overhead Transmission Line|
|Reference standard:||ASTM B, BS, DIN, IEC|
|Certification:||ISO, CCC, TUV, CE|
|Voltage:||up to 1000KV|
|No. of wires:||19|
|Diameter of wire:||3.18 mm|
Packaging & Delivery
Packaging Details: New wooden drum, Reel, Circle or according to
Delivery Time: According to customer's request, usually 2-4 weeks.
The bare conductor:AAC,AAAC,ACSR,AACSR,ACAR and Galvanized steel
wire, are used in overhead electric power transmission and
distribution lines with various grade voltage.
- High tensile strength
- Long life
- Light in weigh
- Suitable for high as well as extra high overhead
All Aluminum-Alloy Conductors (AAAC) is a concentric-lay-stranded
conductor consisting of aluminum-alloy wires available in both
single layer and multi-layer constructions.
Standard 6201-T81 high strength aluminum conductors, conforming to
ASTM Specification B-399, are concentric-lay- stranded, similar in
construction and appearance to 1350 grade aluminum conductors.
Standard 6201 alloy conductors are similar to other alloy
conductors commercially known as Ardival, Aldrey or Almelec. They
were developed to fill the need for an economical conductor for
overhead applications requiring higher strength than that
obtainable with 1350 grade aluminum conductors, but without a steel
core. The DC resistance at 20°C of the 6201-T81 conductors and of
the standard ACSRs of the same diameter are approximately the same.
Conductors of the 6201-T81 alloys are harder and, therefore, have a
greater resistance to abrasion than conductors of 1350-H19 grade
Anti-corrosion ACSR is used in the corrosive areas like coastal
areas or industrial zones. This ACSR is filled with anti-corrosive
grease applied on the gaps between stranded wires and their
Generally, anti-corrosion ACSR is divided into three types
according to the method of greases coating :
*Light Anti-corrosion Type : Only steel wires are coated
*Medium Anti-corrosion Type : All the inner layers are coated
*Heavy Anti-corrosion Type : All the inner and outer layers are
- High strength to weight ratio
- Better sag characteristics
- Improved electrical properties
- Excellent resistance to corrosion
Aluminium Conductors are predominantly used in Overhead Line
applications and for primary and secondary power distribution.
All Aluminum-Alloy Conductors (AAAC) can be used in Medium, High
and Extra-High voltage transmission lines. AAAC offers better sag
performance due to the high strength-to-weight ratio provided by
the aluminum-alloy. In addition, AAAC provides a higher corrosion
resistance than ACSR conductors.
(1) all aluminium conductor (AAC)
(2) all aluminimum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW)
(6)rear earth aluminimum conductor steel reinforced(ACSR/RE)
(7)aluminimum conductor aluminimum alloy reinforced(ACAR)
Relative manufacturing standards
Our Bare conductor can meet or exceedthe item of cable
AAC : IEC 61089, ASTM B231, BS 215 part1, DIN 48201 etc.
AAAC : IEC 61089, ASTN B399, BS EN50183, BS 3242, DIN 48201 etc.
ACSR : IEC61089, ASTM B232, BS 215 part2, DIN 48204 etc.
ACAR : ASTM B524, IEC 61089 etc.
AACSR : ASTM B711, DIN 48206, IEC 61089 etc.
However, XYHY can also supply a range of alternative designs to
meet customer-specified requirements.